Don't Forget, meetings have moved to our new location @ Round Table Pizza, 8822 Madison Ave, Fair Oaks, CA 95628!
11:21 pm
January 27, 2011
Offline
Would any of you welders out there be available either Tuesday or Wednesday evening next week (5/29 or 5/30) to help me in the final stage of building my rear bumper?
In all honesty, I don't see more than 30 minutes of actual setup and welding time. Im' good at prepping and fitting, just have -0- ability to weld.
Thanks!
=====
If you do not change direction, you may end up where you are heading -- Lao Tzu
5:57 am
I'll check my availability. I'm certainly not the best as there are some real good welders here. If I get the OK, then you let me know for sure if I'm chosen. 😀
6:16 am
January 27, 2011
Offline
It'll all be straight line welds. No curves or compound angles.
=====
If you do not change direction, you may end up where you are heading -- Lao Tzu
4:36 pm
just tack it in place so you can move it to wherever if you cant find someone to come to you this way you can go to them
9:22 pm
Tom,
I'll only be available Tuesday. I'd come after work. If you someone better does not volunteer, then you can decide if I'm worthy.
11:15 pm
Club Member
January 19, 2011
Offline
I would help you if I could Tom but I skipped welding class. I'm pretty good with duct tape and bailing wire. Good luck on your build.
Semper Fi
11:37 pm
Whats wrong with welding it on Monday ?
Tuesday Work will be treating me like a device and not a person, and Wednesday I'll be out of town.
Let me know if Monday would work for you Tom.
5:20 am
Bring it by my house on tues afternoon. we can get you dialed in. Just make sure Carl shows up at the same time.... 😛
1:47 pm
January 27, 2011
Offline
@ray: I don't weld nor do I have a welder to even tack.
If you do not change direction, you may end up where you are heading -- Lao Tzu
1:48 pm
January 27, 2011
Offline
@josh: I'm good with duct tape as well. If it were that way, there'd be no worries.
If you do not change direction, you may end up where you are heading -- Lao Tzu
1:49 pm
January 27, 2011
Offline
@rick-rock: son and a friend are coming over for dinner Monday is the reason for a "no go" that say.
If you do not change direction, you may end up where you are heading -- Lao Tzu
1:50 pm
January 27, 2011
Offline
@lj4x4: can't commit for Karl. What about the rest?
If you do not change direction, you may end up where you are heading -- Lao Tzu
3:04 pm
Ya come on over around one. I Will have to work during masons nap.
3:21 pm
January 27, 2011
Offline
Let me get a read on my day first thing in the morning. After a holiday weekend it will be one of two extremes.
PM me your address and contact info and I'll let you know as soon as I do.
Thanks!!
=====
If you do not change direction, you may end up where you are heading -- Lao Tzu
4:22 pm
January 8, 2003
Offline
I have nothing useful to add as my neighbor has a long term loan on my welder, but I had heard that a "weldor" is a person that welds and a "welder" is the machine that does the welding. Could make for easier post title sometime in the future. or not... 😀
6:29 pm
January 27, 2011
Offline
I was thinking along those same lines, but I'm too many years removed from grammar and was too lazy to look it up.
If you do not change direction, you may end up where you are heading -- Lao Tzu
11:24 pm
Not available that time. Work. You'll be in good hands.
Carl
9:05 pm
January 27, 2011
Offline
Well, it doesn't look like it will happen this week either. Just too much time at work to get my new team through training and up to speed. I can live without a bumper for another run.
More important I get the rocker guard set up for the trip.
=====
If you do not change direction, you may end up where you are heading -- Lao Tzu
1 Guest(s)
