Kris's garage sale

TJ steering box skid, new unused - $30 I want this just not sure when I'll be around to get it from you.

Kris, i'm interested in the vice if you will sell separately but ok if not.  and the roomba's as well.

Mike G said TJ steering box skid, new unused - $30 I want this just not sure when I'll be around to get it from you.  

It is small enough to toss in the backseat of the truck until the next club meeting.  No worries.

davesjk said Kris, i'm interested in the vice if you will sell separately but ok if not.  and the roomba's as well.    

How about $50 and a 12pack of IPA for both the roombas and the vise?

Roombas are both discovery series, vise is a PONY 3.5".

Kris I'm interested in the HD Tie Rod can I get it from you at the next meeting or do you need gone before that?

Gilbert & Betty said Kris I'm interested in the HD Tie Rod can I get it from you at the next meeting or do you need gone before that?  

I can hold everything until the next meeting.

kris_olof said

I can hold everything until the next meeting.  

thanks kris

kris_olof said

How about $50 and a 12pack of IPA for both the roombas and the vise?

Roombas are both discovery series, vise is a PONY 3.5".  

deal!  do you have an ipa favorite?

kris_olof said

It is small enough to toss in the backseat of the truck until the next club meeting.  No worries.  

I might not be around until next year with my baby girl being in the hospital, if you have it then I'll take it if not I understand. I'm hearing 6 to 8 weeks minimum in the hospital.

But prayers are going for sooner than that...

davesjk said

deal!  do you have an ipa favorite?  

All west coast IPAs work

4.0 Heads - Either of them any good? After getting Logan Cherokee running, I popped the radiator cap and found lots of foam. Will be pulling the head for inspection this week. Hoping it is just a head gasket...

On the bright side. It did idle nice, and ran fairly smooth.

BLTJeep said 4.0 Heads - Either of them any good? After getting Logan Cherokee running, I popped the radiator cap and found lots of foam. Will be pulling the head for inspection this week. Hoping it is just a head gasket... On the bright side. It did idle nice, and ran fairly smooth.  

Maybe, that is why I am selling them at core prices.  Both were pulled out of running cherokees with about 100k on them.  2 different casting numbers.  One is a Renix head 88ish and the other is 98ish.  One 2686 casting and one 0630 casting.  Here is a cheat sheet of the casting numbers:

#2686 - 1987-1990 ("RENIX"😉
#7120 - 1991-1995 (OBD-I)
#0630 - 1996-2000 ("early" OBD-II.)
#0331 - 2000-2006 ("late" OBD-II.)

kris_olof said Jeep stuff:

TJ/XJ/ZJ/LJ/MJ HD tie rod, new unused - $50

Jeep 4.0 heads, 2 different styles, good cores - $50 each

Rubicon Express 3.5" coil springs for TJ, used -  $100 for all 4

Bestop underseat storage drawer for TJ or universal mounting, new in box, fits under drivers seat - $30

TJ Dana 35 rear shafts, good for spares - $20 for both or a 12 pack of IPA

TJ Hardtop storage cart, metal tube with rubber and foam pads on casters, now sells for $160 on quadratec - $50

Free stuff (a cold beer is always welcome):

TJ/XJ/MJ/LJ/ZJ brake calipers, used good for cores. (Seriously brakes are important, at least rebuild them if they aren't cores)

Sharper Image ionic breeze 3.0 air purifier

Queen size denim duvet set with bedskirt, duvet, 2 pillow cases, and a throw pillow.

No use to me stuff:

Work bench/work table 32"x76" plywood top, 2x6 frame, 4x4 legs - $20 or a 12 pack of IPA

Bissel bagless vacuum, standard upright vacuum with all accessories including a "turbo brush", works - $20 or a 12 pack of IPA

Netgear 8 port gigabit switch - $20 or a 12 pack of IPA

That's a lot of IPA, stocking up!🎉

New items.

JK headlights and bulbs. Takeouts. Was going to swap them into my Jeep but I'm thinking about going LED instead. (TJ upgrade with some wire splicing or some cheap adapter plugs) - $20 or a 12 pack of IPA

Free reading material- all 2016 issues of the following magazines:

-JP

-Fourwheeler

-Petersons 4wheel and off road

-Crawl

-Overland Journal

-OutdoorX4

Have the magazines been flagged? (Seinfeld reference)

Can you check the 0630 head for a temp sensor hole?

Top of head towards the back between the last 2 head bolts, spring side.

I'll take the head lights what kind of IPA ?

Gilbert & Betty said I'll take the head lights what kind of IPA ?  

If it comes in a 12 pack and you can get it locally then I like it.  Anything by Ninkasi, Deschutes, Lagunitas, or Bear Republic is a safe bet.

BLTJeep said Can you check the 0630 head for a temp sensor hole?   Top of head towards the back between the last 2 head bolts, spring side.

My 0630 head does not but the 2686 does.  I believe the Jeep that the 0630 came out of had the temp sensor on the thermostat housing.

I'll grab the under seat storage box if it's still available

ill be at febuarys meeting

if I can't fit it in the jk it should fit in yj

New Items:  (discounts for taking more than one item or paying with beer)

-complete 9in drop out/center section, 4.11 gears, open diff, 28 spline, less than 10k on gears and bearings - $200

-set of 4.11 gears for a Ford 9inch, new in box and wrapped in oil paper, never used, summit part number 740903, made by Richmond - $75

-Complete richmond install kit with Timkin bearings for 31 spline ford 9in, new in box and shrink-wrapped - $50

-new Ratech 9in track-lok ring gear bolts, part number 1305 - $5

-Refurbished 9in pinion support, (cleaned, blasted, primered, not cracks or wear) - $20

-2 used cast 9in yokes, factory style truck 1330 u-joints, includes u-bolts and nuts - $10 each

-Factory 9in set of 3 something gears (3.21 maybe, haven't bothered looking), unknown mileage out of a 70s car, good for gas mileage or paper weight - $10

-Factory XJ rear driveshafts (non-CV).  One is out of an 89 XJ with the Dana 35, one out of a 2000 XJ with the 8.25 and another out of a 1999 with the 8.25. All were 4x4 auto.  Good spares or cores for driveline shop modifications, good for 1310 weld yokes and tube material at least.  $10 each or $20 for all 3

-K&N cold air intake for 4.0 TJ, larger dry filter element, had to remove to clear my compressor mount. - $100

More Axle Parts:

-Trail Gear Rock Assault 9in housing, un-cut full length, 3.5" tube, 3/8" wall - $400 obo (sells for 550 before tax and shipping)

-99-04 Super duty ball joint inner-Cs, for 3.5" tube - $200 obo (same as the currie units which sell for $567)

-Dana 44 inner-Cs, 1/2ton, for 3" tube, (not tj or jk style) - $100 obo

-TJ front axle bracket kit (mix of parts: ballistic spring perches and upper mounts and track bar, artec lower link mounts, parts-mike raised track bar bracket) - $200 obo

-New 9in nodular iron dropout for 31 spline axles, empty case, unused $200 obo

Coming soon:

-TJ axle set dana 30 and ford 8.8, 4.10 gears, rear limited slip (could use new clutch packs), disc brakes, e-brake (could use new pads), solid diff cover on rear, roughstuff diff cover for front, Atrec Industries truss system with truss bridge - Make offer

-TJ/XJ/MJ/ZJ Currie Correctlync steering - make offer

Axle build kit right there!  Wish I had the funds and rig to put them under.

Gregulator said Axle build kit right there!  Wish I had the funds and rig to put them under.  

I've got the rig, but not the funds...