Skip to content

CB radio shop

  1. RobD Subscriber
    #2623 Dec 2010, 4:31 PM

    I think the model 75 is crap!!! I had one and went back to a small traditional CB mounted overhead close to the windshield. No need for an external speaker if you go that way.

    __________________ 'If we ever forget that we're one nation under God, then we will be a nation gone under."- Ronald Reagan
  2. JohnDF Member Joined: July 2003
    #2723 Dec 2010, 4:33 PM
    "RobD" wrote: I think the model 75 is crap!!! .

    That's only because you're old and hard of hearing. They seem to work fine for the rest of us. Maybe you need hearing aids 😲

    I used to wheel a lot. . .
  3. RobD Subscriber
    #2823 Dec 2010, 4:54 PM

    Since you always take the easy lines, you have time to play with all the dials on the 75 :throw:



    "JohnDF" wrote: [quote="RobD"]I think the model 75 is crap!!! .

    That's only because you're old and hard of hearing. They seem to work fine for the rest of us. Maybe you need hearing aids 😲

    __________________ 'If we ever forget that we're one nation under God, then we will be a nation gone under."- Ronald Reagan
  4. JohnDF Member Joined: July 2003
    #2923 Dec 2010, 6:44 PM
    "RobD" wrote: Since you always take the easy lines, you have time to play with all the dials on the 75 :throw:

    [quote="JohnDF"][quote="RobD"]I think the model 75 is crap!!! .

    That's only because you're old and hard of hearing. They seem to work fine for the rest of us. Maybe you need hearing aids 😲

    Just following you :rasta:

    I used to wheel a lot. . .
  5. Guest former user
    #3016 Mar 2011, 1:03 AM

    Sorry to revive an old thread. I was just wondering what you guys are doing to tweak your CB's.



    I just installed my Cobra 75 WX ST. I'm going to that 49 truck stop tomorrow to get the antenna tuned but was wondering if I can tweak it and if I should do it before I get the antenna done?



    And should I have my AUX cable plugged in while tuning the antenna? Or will it not matter much?

  6. JohnDF Member Joined: July 2003
    #3116 Mar 2011, 12:22 PM

    The CB shop should be able to tweak it for you before they tune it.

    I used to wheel a lot. . .
  7. Tom Subscriber
    #3226 Jan 2012, 11:40 AM
    "melyash" wrote: Sorry to say I went by there recently and the Shop is closed, and in fact the whole building it was in is now gone. They did good work but I Guess the economy go to em. CB Headquarters 3435 Mission Ave, Carmichael, CA 95608 916) 485-4788
    is the only one I know of in Sacramento.

    I'm sorry to see anyone go under in this economy. And Melyash, make sure and introduce yourself ... WELCOME!!

    =====

    If you do not change direction, you may end up where you are heading -- Lao Tzu
  8. Guest former user
    #3326 Jan 2012, 1:06 PM

    Wow, thanks for the report. I was planning to go there b/c of this thread... lol



    Still need the whip and wire, then do a tune. Radioshack, one in Folsom, now does not carry anything but cellphone paraphernalia. lol



    You all probably knew that.



    Well, thanks for providing another location. Any good/bad/feedback on the shop you mentioned?

  9. BKGM Jeepers President Joined: June 2003
    #3426 Jan 2012, 2:07 PM

    I've heard there are about 3 CB shops in the area. With me changing my set up, I'll be needing a tune.



    No one locally will tweak a unit anymore. You'd need to buy one powered up, or send your unit off to NV or TX. The cost is only about $30 + shipping now a days.

    Kathleen and Brad
  10. Guest former user
    #356 Feb 2012, 7:16 AM
    "melyash" wrote: Sorry to say I went by there recently and the Shop is closed, and in fact the whole building it was in is now gone. They did good work but I Guess the economy go to em. CB Headquarters 3435 Mission Ave, Carmichael, CA 95608 916) 485-4788
    is the only one I know of in Sacramento.



    I went to this shop and had a great experience. Seem to have a good selection on equipment as I picked up all I needed, whip, coax, and mount. Includes free tune. The guy was impressed with the 102" whip performance as it showed barely noticeable change from up to military tie down.



    I picked up a spring for Bill and he gets a free tune for that, which he needs.



    Tunes are $15 unless you purchase some stuff. Didn't seem to be a limit on that as the spring was just under $15.



    Thought to pass this on.

  11. JohnDF Member Joined: July 2003
    #366 Feb 2012, 7:21 AM

    Thanks for passing it along. Sounds like a good place.

    I used to wheel a lot. . .
  12. Tom Subscriber
    #376 Feb 2012, 7:24 AM
    "Wh1t3Nukle" wrote: [quote="melyash"]Sorry to say I went by there recently and the Shop is closed, and in fact the whole building it was in is now gone. They did good work but I Guess the economy go to em. CB Headquarters 3435 Mission Ave, Carmichael, CA 95608 916) 485-4788
    is the only one I know of in Sacramento.



    I went to this shop and had a great experience. Seem to have a good selection on equipment as I picked up all I needed, whip, coax, and mount. Includes free tune. The guy was impressed with the 102" whip performance as it showed barely noticeable change from up to military tie down.



    I picked up a spring for Bill and he gets a free tune for that, which he needs.



    Tunes are $15 unless you purchase some stuff. Didn't seem to be a limit on that as the spring was just under $15.



    Thought to pass this on.

    Excellent news. I need to get up that way myself. With all the interior out of the XJ I can probably put in a REALLY efficient system.

    =====

    If you do not change direction, you may end up where you are heading -- Lao Tzu
  13. BKGM Jeepers President Joined: June 2003
    #386 Feb 2012, 7:50 AM

    I'm collecting parts to upgrade my system and have just about everything. I guess I'll be paying the $15 for a tune, or maybe get some training from Fred.



    I need to google the shop to see exactly where they are located.

    Kathleen and Brad
  14. Fred Subscriber
    #396 Feb 2012, 8:42 AM
    "BKGM Jeepers" wrote: I guess I'll be paying the $15 for a tune, or maybe get some training from Fred.



    It's really not too difficult. It can be a little time consuming, but not too bad.

  15. BKGM Jeepers President Joined: June 2003
    #406 Feb 2012, 9:07 AM

    The new antenna I purchased is tunable, so I guess it would be worth learning. Do you still have your tuner?

    Kathleen and Brad
  16. Fred Subscriber
    #416 Feb 2012, 9:18 AM
    "BKGM Jeepers" wrote: Do you still have your tuner?



    Sure do. I can help you with it. If you want to pick up your own they don't cost much. I've had mine for a while but I think I paid about $20 for it at Radio Shack. Here's one similar to mine for even less on Amazon - http://www.amazon.com/METER-Radio-Anten ... B002KRME3C. My meter came with instructions on how to tune the antenna.

  17. Tom Subscriber
    #426 Feb 2012, 9:43 AM

    I'll start carrying my SWR meter as well should anyone need it.

    =====

    If you do not change direction, you may end up where you are heading -- Lao Tzu
  18. Guest former user
    #436 Feb 2012, 10:18 AM

    I have a bit of an antique meter. It would be interesting to see how it compares with a newer meter.

  19. BKGM Jeepers President Joined: June 2003
    #446 Feb 2012, 10:50 AM

    I have no meter. It will be interesting to see how it compares with an antique meter! 😀



    I guess I need to step up and buy one of those new meters...

    Kathleen and Brad
  20. Tom Subscriber
    #456 Feb 2012, 3:05 PM
    "BKGM Jeepers" wrote: I have no meter. It will be interesting to see how it compares with an antique meter! 😀

    I guess I need to step up and buy one of those new meters...

    My meter is an antique. Bought it from Radio Shack in 1975 when I was doing all sorts of CB installs. Good news is, the laws of physics and wave propagation have not changed in that time so it should still be good. 😁

    =====

    If you do not change direction, you may end up where you are heading -- Lao Tzu
  21. huck271 Subscriber
    #466 Feb 2012, 9:39 PM

    When I was installing mine I went to the 49er truck stop off 80 and in the back is a cb shop. They helped tune it and it hasn't let me down yet.



    Huck

  22. Tom Subscriber
    #477 Feb 2012, 7:29 AM
    "huck271" wrote: When I was installing mine I went to the 49er truck stop off 80 and in the back is a cb shop. They helped tune it and it hasn't let me down yet.

    Huck

    Earlier in the thread, someone mentioned the CB shop at the 49er was closed. BIG bummer.

    =====

    If you do not change direction, you may end up where you are heading -- Lao Tzu
  23. BKGM Jeepers President Joined: June 2003
    #487 Feb 2012, 10:09 AM

    I went to 49'r as well. Too bad they closed...

    Kathleen and Brad

Sign in to post here.