JohnDF Member Joined: July 2003
JohnDF Member Joined: July 2003
I am going to take George's and Brad's moderator privledges away. Kids with guns...
I used to wheel a lot. . .
Got lines on a couple of Ford HP D44s.
BKGM Jeepers President Joined: June 2003BKGM Jeepers President Joined: June 2003"JohnDF" wrote: I am going to take George's and Brad's moderator privledges away. Kids with guns...
With great power comes great responsibility...
Anyone?Kathleen and Brad- BKGM Jeepers President Joined: June 2003BKGM Jeepers President Joined: June 2003
"FAM" wrote: [quote="JohnDF"]Oh, I also found an internal sleeve kit for $130 delivered.
I haven't heard of that before. Got any links to more info?
Here is one example:
http://www.quadratec.com/products/16356_1011.htm
This is not the specific one I found. I found one that you Froze, and then installed. It expanded with room temp and then remained in place, apparently without any welding...Kathleen and Brad 
Tom SubscriberTom started this Subscriber"BKGM Jeepers" wrote: [quote="FAM"][quote="JohnDF"]Oh, I also found an internal sleeve kit for $130 delivered.
I haven't heard of that before. Got any links to more info?
Here is one example:
http://www.quadratec.com/products/16356_1011.htm
This is not the specific one I found. I found one that you Froze, and then installed. It expanded with room temp and then remained in place, apparently without any welding...I like the sound of that!! I can't weld but I can use a freezer ... that's where I keep the tequila and vodka!
=====If you do not change direction, you may end up where you are heading -- Lao Tzu- BKGM Jeepers President Joined: June 2003BKGM Jeepers President Joined: June 2003
I've heard you prepare your front end, get the sleeves home, place dry ice over them for a couple of hours, pull them out (using gloves) and slide them in and line them up. Leave them alone and they set themselves...
Kathleen and Brad - Tom SubscriberTom started this Subscriber
I've not seen that one.
All are "plug weld" save one manufacturer that you can drive it into the axle. Unfortunately, they only build the non-weld for the D30/D44 on JKs.
=====If you do not change direction, you may end up where you are heading -- Lao Tzu - BKGM Jeepers President Joined: June 2003BKGM Jeepers President Joined: June 2003
"TomD" wrote: I've not seen that one.
All are "plug weld" save one manufacturer that you can drive it into the axle. Unfortunately, they only build the non-weld for the D30/D44 on JKs.
=====
Bummer. Is the D30 on a JK a HP? The D44 is...Kathleen and Brad - Tom SubscriberTom started this Subscriber
"BKGM Jeepers" wrote: [quote="TomD"]I've not seen that one.
All are "plug weld" save one manufacturer that you can drive it into the axle. Unfortunately, they only build the non-weld for the D30/D44 on JKs.
=====
Bummer. Is the D30 on a JK a HP? The D44 is...Isn't it that "hybrid" thing? D44 gears/pumpkin with D30 tubes and outers? I believe they are still LP but I may be mistaken.
Here's the link: http://dunksperformance.com/nitro-s-dan ... eeves.html
=====If you do not change direction, you may end up where you are heading -- Lao Tzu - BKGM Jeepers President Joined: June 2003BKGM Jeepers President Joined: June 2003
The JKU front D44 is a HP. Maybe John can check out his front axle to see if it's also a HP.
Kathleen and Brad - JohnDF Member Joined: July 2003JohnDF Member Joined: July 2003
My JKU front D30 is high pinion
I used to wheel a lot. . . - BKGM Jeepers President Joined: June 2003BKGM Jeepers President Joined: June 2003
Yeah! I'm almost half way to John's post count!
Kathleen and Brad - Tom SubscriberTom started this Subscriber
"BKGM Jeepers" wrote: Yeah! I'm almost half way to John's post count!
I'll run out of things to say LONG before I get that post count. :slap:
=====If you do not change direction, you may end up where you are heading -- Lao Tzu - JohnDF Member Joined: July 2003JohnDF Member Joined: July 2003
"TomD" wrote: [quote="BKGM Jeepers"]Yeah! I'm almost half way to John's post count!
I'll run out of things to say LONG before I get that post count. :slap:
=====Nonsense, I never say anything of importance and I have a huge post count.
I used to wheel a lot. . . - BKGM Jeepers President Joined: June 2003BKGM Jeepers President Joined: June 2003
"JohnDF" wrote: [quote="TomD"][quote="BKGM Jeepers"]Yeah! I'm almost half way to John's post count!
I'll run out of things to say LONG before I get that post count. :slap:
=====Nonsense, I never say anything of importance and I have a huge post count.
Me too. I'm just twice as efficient at saying nothing important as John is! 😤Kathleen and Brad - JohnDF Member Joined: July 2003JohnDF Member Joined: July 2003
"BKGM Jeepers" wrote: [quote="JohnDF"]Nonsense, I never say anything of importance and I have a huge post count.
Me too. I'm just twice as efficient at saying nothing important as John is! 😤No, I'm just twice as good at saying nothing. Look, I did it again 🙂
I used to wheel a lot. . . - BKGM Jeepers President Joined: June 2003BKGM Jeepers President Joined: June 2003
Oh grasshopper. Wise grasshopper.
Kathleen and Brad 
Gregulator Member Joined: February 2012Gregulator Member Joined: February 2012Quit post padding you two! I'm trying to catch up.
Um...what?- BKGM Jeepers President Joined: June 2003BKGM Jeepers President Joined: June 2003
More good news! - NOT!
http://content.usatoday.com/communities ... e-stolen/1
So I own Toyota's that get their cats stolen and now this? Wow!Kathleen and Brad - Guest former userGuest former user
Seems odd that there advice to those in high crime areas is to take their doors off.
- Tom SubscriberTom started this Subscriber
I was just reading on the Reno4x4 forum that has happened more than once in the Reno/Sparks area.
=====If you do not change direction, you may end up where you are heading -- Lao Tzu - BKGM Jeepers President Joined: June 2003BKGM Jeepers President Joined: June 2003
So where do the doors show up? Is someone putting them on Ebay? Are they being sold to auto wreckers? Where's the market for these?
Kathleen and Brad
Sign in to post here.