Skip to content

FD survey and possible work weekend July 25-27

  1. Guest former user
    #116 Jul 2008, 2:04 PM

    We could still use a couple more rigs if you can make it. 😁



    ----------------

    The FOF will be escorting a group of 6 FS people in to the Mud Hole area for a second look at our proposed trail re-route on Friday July 25th. We need at least three additional seats as of now. Extras would be good too. After looking at that area we are planning on taking a look at our proposed Committee Trail re-route as well. If approved we can start clearing it out Saturday. It's a short re-route and could be done in one day if we get enough people willing to show up on the chance we get the go ahead.



    Please let me know if you would like to participate.



    In addition to our public relations contact, Joe Chavez we will be taking a:



    Botanist

    Wildlife Biologist

    Archaeologist

    Recreation Planner



    We will also be taking our new Tahoe Forest Supervisor, Tom Quinn in for a ride.



    Take this opportunity to help out and meet Tom and the personel that are working to keep our access to the Fordyce trail alive.



    We will meet at Cisco Grove campground Friday at 10 am.

  2. RobD Subscriber
    #216 Jul 2008, 9:01 PM

    I will be there if I can get the time off at work, which shouldn't be a problem....I have one seat.

    __________________ 'If we ever forget that we're one nation under God, then we will be a nation gone under."- Ronald Reagan
  3. Guest former user
    #317 Jul 2008, 8:57 AM

    Excellent Rob…let me know when you have confirmed that you can get the day off of work.

  4. Guest former user
    #417 Jul 2008, 9:30 AM

    Our start time will be 9am on Sat (pending approval)



    We will be meeting at FOF camp. (The camping spot between the Fordyce Lake Road and Fordyce Lake just before the left that takes you down to the committee crossing)



    http://maps.google.com/maps?f=q&hl=en&g ... 6&t=h&z=17

  5. Guest former user
    #517 Jul 2008, 9:42 AM

    I can probably make it as well on Saturday morning (work schedule permitting) and would have one seat available. I'll confirm as the date gets closer.

  6. Guest former user
    #617 Jul 2008, 10:30 AM
    "troyman" wrote: I can probably make it as well on Saturday morning (work schedule permitting) and would have one seat available. I'll confirm as the date gets closer.



    Great!



    We only need seats on Friday and we will be covered for sure if Rob is there....Saturday the FS will not be there so just bring tools. 😀

  7. RobD Subscriber
    #718 Jul 2008, 6:26 AM
    "rainfly" wrote: [quote="troyman"]I can probably make it as well on Saturday morning (work schedule permitting) and would have one seat available. I'll confirm as the date gets closer.



    Great!



    We only need seats on Friday and we will be covered for sure if Rob is there....Saturday the FS will not be there so just bring tools. 😀





    I took the day off, so I will be there on Friday. I am not sure about Sat. yet. I am running the trail this Monday, lets just hope I don't break anything 😏

    __________________ 'If we ever forget that we're one nation under God, then we will be a nation gone under."- Ronald Reagan
  8. RobD Subscriber
    #818 Jul 2008, 6:30 AM

    rainfly, are you guys camping Friday night?

    __________________ 'If we ever forget that we're one nation under God, then we will be a nation gone under."- Ronald Reagan
  9. Guest former user
    #918 Jul 2008, 9:01 AM
    "RobD" wrote: rainfly, are you guys camping Friday night?



    Yes...we will be camping Friday and Saturday night. Friday night will most likely be at FD Lake and you are more than welcome to join us.



    When you are up on Monday keep an eye out for this trouble spot reported. I am not sure you will be going this way but if you are please take a few pics for me.



    Thanks!





    TRAIL REPORT



    If you haven’t seen it, you should be aware of some trail abuse at Committee Trail. Basically, if your coming up from river and are almost to long dirt section, there’s the two way split…well, now there’s three ways. Runs about 40’ through what were a few small trees. Noticed it 3 weeks ago and tried to block it off but they were gone again by last weekends trip. My son and I, once again, stacked more logs but by Sunday’s exit they were moved again. Irritating.

  10. RobD Subscriber
    #1018 Jul 2008, 8:57 PM
    "rainfly" wrote: [quote="RobD"]rainfly, are you guys camping Friday night?



    Yes...we will be camping Friday and Saturday night. Friday night will most likely be at FD Lake and you are more than welcome to join us.



    When you are up on Monday keep an eye out for this trouble spot reported. I am not sure you will be going this way but if you are please take a few pics for me.



    Thanks!





    TRAIL REPORT



    If you haven’t seen it, you should be aware of some trail abuse at Committee Trail. Basically, if your coming up from river and are almost to long dirt section, there’s the two way split…well, now there’s three ways. Runs about 40’ through what were a few small trees. Noticed it 3 weeks ago and tried to block it off but they were gone again by last weekends trip. My son and I, once again, stacked more logs but by Sunday’s exit they were moved again. Irritating.





    I will probably be camping that night with you guys. Anything I can bring for camp? Who all is camping?

    __________________ 'If we ever forget that we're one nation under God, then we will be a nation gone under."- Ronald Reagan
  11. Guest former user
    #1119 Jul 2008, 8:56 PM

    Just bring what you you need for yourself. I think the camping group for Friday will be small. Me, Rolo, Tinman, Cucumber, Moth, Jeff Hill but other may show. Good group of guys.

  12. RobD Subscriber
    #1219 Jul 2008, 9:38 PM

    Sounds good, any specific tools you need for the work day? Shovel, clippers, chainsaw, etc?

    __________________ 'If we ever forget that we're one nation under God, then we will be a nation gone under."- Ronald Reagan
  13. Guest former user
    #1320 Jul 2008, 4:44 PM

    Any of these would be great.



    Tools needed:



    large loppers



    large pry bars (the 5’+ type)



    tires chains



    shovels



    picks



    pruning handsaws

  14. Guest former user
    #1421 Jul 2008, 10:06 AM

    Don't think I'm going to be able to make this one after all. Had a little fall out from the Barrett Lake cleanup this past weekend. Need to get a new front driver's hard brake line and longer soft lines for both sides. I'll report back if I can get to them during the week

  15. RobD Subscriber
    #1521 Jul 2008, 9:39 PM

    Rainfly, I am on slight hold for Friday, SORRY..........I ripped my driver side upper and lower control arm brackets off my frame today on Fordyce...I am going to call my fab guy tomorrow morning and see if he will do an emergency repair for me.. I should have a answer for you by tomorrow afternoon. John is being a nice guy and not gloating about the fact I had to be towed home on a flatbed again 😈



    Rob

    __________________ 'If we ever forget that we're one nation under God, then we will be a nation gone under."- Ronald Reagan
  16. JohnDF Member Joined: July 2003
    #1622 Jul 2008, 5:58 AM

    I am such a nice guy 😳

    I used to wheel a lot. . .
  17. Dan-H Subscriber
    #1722 Jul 2008, 7:32 AM

    how do you tear the frame mount off an RELA kit?



    pics?

    Closed Mondays.
  18. JohnDF Member Joined: July 2003
    #1822 Jul 2008, 7:33 AM

    It's the mount on the belly pan (frame end).

    I used to wheel a lot. . .
  19. Dan-H Subscriber
    #1922 Jul 2008, 7:44 AM

    ouch.

    Closed Mondays.
  20. Justin Subscriber
    #2022 Jul 2008, 8:56 AM
    "Dan-H" wrote:

    pics?



    x2

  21. RobD Subscriber
    #2122 Jul 2008, 9:20 AM

    Rainfly,



    I should be good to go, I am meeting my fabricator at 5:15 tonight and we are going to attempt to fix it.....

    __________________ 'If we ever forget that we're one nation under God, then we will be a nation gone under."- Ronald Reagan
  22. Guest former user
    #2222 Jul 2008, 9:27 AM

    Some people have a lawyer on retainer, Rob has a fabricator. 😂 😂

  23. JohnDF Member Joined: July 2003
    #2322 Jul 2008, 9:34 AM

    He needs one...I feel sorry for the "official" that gets to ride with Rob 😂

    ooh...looky...it's pick on Rob day 😂

    I used to wheel a lot. . .
  24. Guest former user
    #2422 Jul 2008, 10:20 AM
    "RobD" wrote: Rainfly,

    I should be good to go, I am meeting my fabricator at 5:15 tonight and we are going to attempt to fix it.....





    OK...good luck! JB weld and duct tape should fix it. 😉



    John's post on PBB made it sound like you made it through without any issues. 😂

  25. Dan-H Subscriber
    #2522 Jul 2008, 10:53 AM
    "rainfly" wrote: OK...good luck! JB weld and duct tape should fix it. 😉



    zip ties should hold it for Rob since he drives so gently 😂

    Closed Mondays.

Sign in to post here.