Skip to content
Gold Hills Posse 4×4 Club · Folsom, CA

Fordyce run June 8

  1. JohnDF Member Joined: July 2003
    #2019 Jun 2008, 9:47 AM
    "Bender" wrote:
    I was waiting for pictures. 😏



    We found some idiots on the trail...

    Attached files

    I used to wheel a lot. . .
  2. RobD started this Subscriber
    #2029 Jun 2008, 9:55 AM
    "JohnDF" wrote: [quote="Bender"]
    I was waiting for pictures. 😏



    We found some idiots on the trail...





    😀

    __________________ 'If we ever forget that we're one nation under God, then we will be a nation gone under."- Ronald Reagan
  3. Dan-H Subscriber
    #2039 Jun 2008, 11:44 AM
    "mtngoht" wrote: I made it.....Doors were still there, changed my Tire. Thanks Dan for plugn' it for me. Great run! I'll post what pics I have later.

    I'm gonna go hose the rig out now. 😂



    Glad to hear you made it out.



    btw,



    Rob plugged the tire. I just supplied the air.

    Closed Mondays.
  4. BKGM Jeepers President Joined: June 2003
    #2049 Jun 2008, 11:46 AM
    "Dan-H" wrote: [quote="mtngoht"]I made it.....Doors were still there, changed my Tire. Thanks Dan for plugn' it for me. Great run! I'll post what pics I have later.

    I'm gonna go hose the rig out now. 😂



    Glad to hear you made it out.



    btw,



    Rob plugged the tire. I just supplied the air.



    What kind of tire was it that failed? I slashed two krawlers on Fordyce, but never lost air....

    Kathleen and Brad
  5. Dan-H Subscriber
    #2059 Jun 2008, 11:48 AM


    Closed Mondays.
  6. Dan-H Subscriber
    #2069 Jun 2008, 11:49 AM
    "BKGM Jeepers" wrote: [quote="Dan-H"][quote="mtngoht"]I made it.....Doors were still there, changed my Tire. Thanks Dan for plugn' it for me. Great run! I'll post what pics I have later.

    I'm gonna go hose the rig out now. 😂



    Glad to hear you made it out.



    btw,



    Rob plugged the tire. I just supplied the air.



    What kind of tire was it that failed? I slashed two krawlers on Fordyce, but never lost air....



    I think it was an MTR and I think it was poked by a stick but I'm not sure. It was a two-plug repair.

    Closed Mondays.
  7. Dan-H Subscriber
    #2079 Jun 2008, 11:52 AM
    "JohnDF" wrote: The best part was finding out that Dan H can handle his Jeep as well as his keyboard 😛



    😂 😂 😂



    I'm still afraid of tipping over backwards 😳

    Closed Mondays.
  8. JohnDF Member Joined: July 2003
    #2089 Jun 2008, 11:55 AM

    Taking a 16 year old young man out in his new truck for the first time...teaching him the fun and responsibility of wheeling...and having him say after Winch Hill #1, "That's the craziest thing I've ever done."...That's what it's all about right there 😎

    Attached files

    I used to wheel a lot. . .
  9. JohnDF Member Joined: July 2003
    #2099 Jun 2008, 11:56 AM
    "Dan-H" wrote:

    I'm still afraid of tipping over backwards 😳

    X2

    I used to wheel a lot. . .
  10. Guest former user
    #2109 Jun 2008, 12:06 PM
    "Dan-H" wrote: [quote="mtngoht"]I made it.....Doors were still there, changed my Tire. Thanks Dan for plugn' it for me. Great run! I'll post what pics I have later.

    I'm gonna go hose the rig out now. 😂



    Glad to hear you made it out.



    btw,



    Rob plugged the tire. I just supplied the air.



    woops.... thanks Rob and Dan!

  11. JohnDF Member Joined: July 2003
    #2119 Jun 2008, 12:08 PM
    "mtngoht" wrote:

    woops.... thanks Rob and Dan!



    Rob is the big, pink guy with the cop mustache 😉

    I used to wheel a lot. . .
  12. JohnDF Member Joined: July 2003
    #2129 Jun 2008, 12:10 PM

    Winch Hill #3 is getting DEEP!!!

    Attached files

    I used to wheel a lot. . .
  13. JohnDF Member Joined: July 2003
    #2139 Jun 2008, 12:31 PM

    My only damage was to my door. I pushed it in pretty good here but it popped out and only left a small dent. The problem is it bent inside and now I can't roll my window up or down 😢 I think I can fix it though.

    Attached files

    I used to wheel a lot. . .
  14. Guest former user
    #2149 Jun 2008, 12:43 PM

    Ahhh yes...the damage report. 😀



    Larry broke my passenger door so now you can't open it from the outside. 🙄 My new powersteering pump doesn't work when it gets hot, or when you're going downhill, or when you just want to turn so I may start looking like Popeye. 😈 And I barely clipped my passenger parking light so I'll have to get a bit creative (duct tape) to make sure it doesn't go anywhere. 😀

  15. BKGM Jeepers President Joined: June 2003
    #2159 Jun 2008, 12:52 PM
    "Dan-H" wrote:



    Yeah, but did Rob Summon the invisible horseman, or shoot him :?:

    Kathleen and Brad
  16. Guest former user
    #2169 Jun 2008, 1:00 PM

    Damage Report...



    (crickets chirping)



    I am lucky I did not have a bad pasenger like Larry to break something!

  17. Guest former user
    #2179 Jun 2008, 1:01 PM
    "Bender" wrote: Ahhh yes...the damage report. 😀

    Larry broke my passenger door so now you can't open it from the outside. 🙄 My new



    🕺 Glad I was good for something yesterday. 😏





    Had a great time. Some excellent wheeling by everyone. Rob if it had been dry conditions, I think you would have made winch Hill #3.



    My hats off to Brian, great job!!

  18. Dan-H Subscriber
    #2189 Jun 2008, 2:08 PM
    "GonZo" wrote:

    🕺 Glad I was good for something yesterday. 😏



    Oh yeah, thanks for helping to change my tire Larry !

    Closed Mondays.
  19. JohnDF Member Joined: July 2003
    #2199 Jun 2008, 2:39 PM
    "GonZo" wrote: Rob if it had been dry conditions, I think you would have made winch Hill #3.



    Wasn't too wet for me 😳 It must be killing you Rob 😛

    I used to wheel a lot. . .
  20. Guest former user
    #2209 Jun 2008, 2:42 PM
    "Dan-H" wrote: [quote="GonZo"]

    🕺 Glad I was good for something yesterday. 😏



    Oh yeah, thanks for helping to change my tire Larry !



    Your welcome Dan.

  21. JohnDF Member Joined: July 2003
    #2219 Jun 2008, 2:42 PM
    "BKGM Jeepers" wrote:
    Yeah, but did Rob Summon the invisible horseman, or shoot him :?:



    We all had Dusty Bottoms.

    I used to wheel a lot. . .
  22. Guest former user
    #2229 Jun 2008, 2:46 PM
    "JohnDF" wrote: [quote="GonZo"]Rob if it had been dry conditions, I think you would have made winch Hill #3.



    Wasn't too wet for me 😳 It must be killing you Rob 😛



    But we all know you’re the master and could make it, and Rob is just your apprentice. So he is still working on perfection. 😏





    I think somewhere I read it was pick on Rob week!!

  23. JohnDF Member Joined: July 2003
    #2239 Jun 2008, 2:51 PM

    It's either pick on Rob week or pick on John week...



    I vote for pick on Rob week 😀



    Actually, we should be nice to him...he's getting kinda old.

    I used to wheel a lot. . .
  24. Guest former user
    #2249 Jun 2008, 3:04 PM

    Damage report







    Bad news...I just changed the oil Friday. Head gasket?



    Any other way water would get in the oil?



    At closer look the oil is VERY metallic. The filter is very heavy too.



    Think I did any major damage driving back?

    Anything else I should check? Help! :banghead:

  25. JohnDF Member Joined: July 2003
    #2259 Jun 2008, 3:46 PM

    Maybe pick on Rob or pick on John days are getting kinda old...



    We should have pick on Justin days too 😀

    I used to wheel a lot. . .

Sign in to post here.