Don't Forget, meetings have moved to our new location @ Mark and Monica's Family Pizza, 4751 Manzanita Ave., Carmichael, CA 95608!
3:12 pm
Club Member
July 10, 2003
Offline
Good luck. I hope you guys make good time without any breakdowns or traffic jams.
I used to wheel a lot. . .
7:40 pm
June 11, 2015
Offline
Im in!
8:40 pm
Club President
April 2, 2003
Offline
Just an FYI Brett. You are second in line but I should know by tomorrow's meeting.
Sorry for any confusion.
Kathleen and Brad
10:42 pm
June 11, 2015
Offline
Ok, just keep me posted thanks!
1:51 pm
Ok so we unfortunately have to cancel riding along this trip. It really sucks, i was looking forward to doing a Fordicon run. Maybe next time.....
8:00 pm
Club President
April 2, 2003
Offline
Brett a seat is available if you'd like.
Since you and Kevin are more on the 80 side you could coordinate and we will meet in Nyack.
Kathleen and Brad
10:19 pm
June 11, 2015
Offline
Ill be there!
10:23 pm
January 20, 2009
Online
Bretjk07 said
Ill be there!
You can ride up to Nyack with me if you want, or head to EDH. We won't be going back to Nyack afterwards.
Kevin
6:13 am
Club President
April 2, 2003
Offline
k-jeep said
Bretjk07 said
Ill be there!You can ride up to Nyack with me if you want, or head to EDH. We won't be going back to Nyack afterwards.
Yes. Either meet at Kevin's house or my house. I'll be leaving at 545. So you'd need to be at my house by 535.
Kathleen and Brad
7:23 am
June 11, 2015
Offline
ok i pm'd Kevin, and if he is good with it i will ride with him.
8:16 pm
January 20, 2009
Online
Packed and ready! Woohoo! 
Kevin
10:10 pm
Club President
April 2, 2003
Offline
k-jeep said
Packed and ready! Woohoo!
X2!
Kathleen and Brad
5:12 am
Club Member
July 10, 2003
Offline
Good luck, have fun, be safe.
I used to wheel a lot. . .
6:52 am
June 11, 2015
Offline
leaving nyack at 7ish
7:14 am
Club Member
July 14, 2016
Offline
Bretjk07 said
leaving nyack at 7ish
Have a good trip. I live off hwy 80 above Auburn so if you have trouble and need something I'm probably one of the closest to Fordyce and I can usually cut out of work if necessary. Post up if you need help like parts or something. I will check this thread throughout the day.
Jeff and Kathy Root
8:08 am
Club Member
February 26, 2014
Offline
good luck have a great trip be safe
6:43 pm
January 20, 2009
Online
You win again Fordyce! You win again! 
My losing streak continues with this trail. Although, I have been able to get out every time. 
After a first bad line and getting strapped off a rock, I did cruise up Winch Hill 1, so that's gotta count for something. 
So I think it all started when my hydro assist, which was attached to the 1/4 inch thick steel track bar bracket, bent the bracket and eventually broke it off the axle. Before breaking off the axle, I believe this stressed the track bar causing it to break. With no track bar, I believe this stressed the upper control arms causing them to break. Good thing I got the winch because I ended up wrapping a tree saver strap around the diff and axle and cinched it down with the winch. Without that I would have been spending the night on the trail.
Oh, and Brett's front axle u-joints came loose as well.
When are we going again?! 
Kevin
6:44 pm
Club Member
August 17, 2014
Offline
Well everyone, we made it out of Fordyce in one piece. Kevin had a variety of issues that cripled his Jeep to a point where straps, duct tape & a tree hugger was used to eventually lead to a sucessful end, meeting a tow truch at Cisco Grove.
What made me proud of our club more than anything else was the folks who did or was willing to step up to the plate to do whatever was necesssry to help on a workday yet!
Thank you all for your kind thoughts & help.
7:48 pm
Club Member
February 26, 2014
Offline
I'm glad everyone is off the trail and safe. Sorry I wasn't on the forum till this evening.
8:21 pm
April 16, 2016
Offline
k-jeep said
You win again Fordyce! You win again!My losing streak continues with this trail. Although, I have been able to get out every time.
After a first bad line and getting strapped off a rock, I did cruise up Winch Hill 1, so that's gotta count for something.
So I think it all started when my hydro assist, which was attached to the 1/4 inch thick steel track bar bracket, bent the bracket and eventually broke it off the axle. Before breaking off the axle, I believe this stressed the track bar causing it to break. With no track bar, I believe this stressed the upper control arms causing them to break. Good thing I got the winch because I ended up wrapping a tree saver strap around the diff and axle and cinched it down with the winch. Without that I would have been spending the night on the trail.
Oh, and Brett's front axle u-joints came loose as well.
When are we going again?!
Kevin,
When I was picking up your parts today at Metal Cloak the guy asked if you were running Hydro assist. I told him that you were. He said that they have had a number of similar situations as yours with the track bar bracket giving way. In particular if they are the bolt on type. He said they have to be welded and heavily reinforced. I told him you were running 60 axles and then he put it together as to who you were. They said that once that bracket goes it throws everything else off and stuff bends and breaks. So unfortunately, your assessment of what happened is consistent with what they believed to be the cause. What is really amazing is that those guys at Metal Cloak stand behind their products even if they don't believe they gave cause for the failure. It certainly gives me cause to think about them when I decide to upgrade my lift kit.
I learned that they are having an open house this Saturday from noon to ? I just might take a ride over there and check it out.
8:59 pm
April 10, 2015
Offline
Sharkbyte said
Kevin,
When I was picking up your parts today at Metal Cloak the guy asked if you were running Hydro assist. I told him that you were. He said that they have had a number of similar situations as yours with the track bar bracket giving way. In particular if they are the bolt on type. He said they have to be welded and heavily reinforced. I told him you were running 60 axles and then he put it together as to who you were. They said that once that bracket goes it throws everything else off and stuff bends and breaks. So unfortunately, your assessment of what happened is consistent with what they believed to be the cause. What is really amazing is that those guys at Metal Cloak stand behind their products even if they don't believe they gave cause for the failure. It certainly gives me cause to think about them when I decide to upgrade my lift kit.
I learned that they are having an open house this Saturday from noon to ? I just might take a ride over there and check it out.
Sharkbyte said
Kevin,
When I was picking up your parts today at Metal Cloak the guy asked if you were running Hydro assist. I told him that you were. He said that they have had a number of similar situations as yours with the track bar bracket giving way. In particular if they are the bolt on type. He said they have to be welded and heavily reinforced. I told him you were running 60 axles and then he put it together as to who you were. They said that once that bracket goes it throws everything else off and stuff bends and breaks. So unfortunately, your assessment of what happened is consistent with what they believed to be the cause. What is really amazing is that those guys at Metal Cloak stand behind their products even if they don't believe they gave cause for the failure. It certainly gives me cause to think about them when I decide to upgrade my lift kit.
I learned that they are having an open house this Saturday from noon to ? I just might take a ride over there and check it out.
I think I will run over there to check it out as well.
9:23 pm
Club Member
September 3, 2008
Offline
Jeff and I will be there at metal cloak also on Saturday.
Sorry about the trouble today Kevin. Fordyce seems to treat me the same way.
Um...what?
9:26 pm
April 9, 2015
Offline
Jeff_R said
Have a good trip. I live off hwy 80 above Auburn so if you have trouble and need something I'm probably one of the closest to Fordyce and I can usually cut out of work if necessary. Post up if you need help like parts or something. I will check this thread throughout the day.
I just got on the forum and read about Kevin's problems. I'm glad everyone is back home safely.
I do think Jeff R is responsible! He jinxed the trip by mentioning having trouble and needing parts.
Kevin, are you going to have a work party to get your rig back together?
1 Guest(s)
