Don't Forget, meetings have moved to our new location @ Mark and Monica's Family Pizza, 4751 Manzanita Ave., Carmichael, CA 95608!
7:14 pm
Club Member
July 10, 2003
Offline
I am going to take George's and Brad's moderator privledges away. Kids with guns...
I used to wheel a lot. . .
7:45 pm
Club President
April 2, 2003
Offline
"JohnDF" wrote: I am going to take George's and Brad's moderator privledges away. Kids with guns...
With great power comes great responsibility...
Anyone?
Kathleen and Brad
7:48 pm
Club President
April 2, 2003
Offline
"FAM" wrote: [quote="JohnDF"]Oh, I also found an internal sleeve kit for $130 delivered.
I haven't heard of that before. Got any links to more info?
Here is one example:
http://www.quadratec.com/products/16356_1011.htm
This is not the specific one I found. I found one that you Froze, and then installed. It expanded with room temp and then remained in place, apparently without any welding...
Kathleen and Brad
7:54 pm
January 27, 2011
Offline
"BKGM Jeepers" wrote: [quote="FAM"][quote="JohnDF"]Oh, I also found an internal sleeve kit for $130 delivered.
I haven't heard of that before. Got any links to more info?
Here is one example:
http://www.quadratec.com/products/16356_1011.htm
This is not the specific one I found. I found one that you Froze, and then installed. It expanded with room temp and then remained in place, apparently without any welding...
I like the sound of that!! I can't weld but I can use a freezer ... that's where I keep the tequila and vodka!
=====
If you do not change direction, you may end up where you are heading -- Lao Tzu
8:58 pm
Club President
April 2, 2003
Offline
I've heard you prepare your front end, get the sleeves home, place dry ice over them for a couple of hours, pull them out (using gloves) and slide them in and line them up. Leave them alone and they set themselves...
Kathleen and Brad
9:41 pm
January 27, 2011
Offline
I've not seen that one.
All are "plug weld" save one manufacturer that you can drive it into the axle. Unfortunately, they only build the non-weld for the D30/D44 on JKs.
=====
If you do not change direction, you may end up where you are heading -- Lao Tzu
10:36 pm
Club President
April 2, 2003
Offline
"TomD" wrote: I've not seen that one.
All are "plug weld" save one manufacturer that you can drive it into the axle. Unfortunately, they only build the non-weld for the D30/D44 on JKs.
=====
Bummer. Is the D30 on a JK a HP? The D44 is...
Kathleen and Brad
11:23 pm
January 27, 2011
Offline
"BKGM Jeepers" wrote: [quote="TomD"]I've not seen that one.
All are "plug weld" save one manufacturer that you can drive it into the axle. Unfortunately, they only build the non-weld for the D30/D44 on JKs.
=====
Bummer. Is the D30 on a JK a HP? The D44 is...
Isn't it that "hybrid" thing? D44 gears/pumpkin with D30 tubes and outers? I believe they are still LP but I may be mistaken.
Here's the link: http://dunksperformance.com/nitro-s-dan ... eeves.html
=====
If you do not change direction, you may end up where you are heading -- Lao Tzu
11:29 pm
Club President
April 2, 2003
Offline
The JKU front D44 is a HP. Maybe John can check out his front axle to see if it's also a HP.
Kathleen and Brad
11:39 pm
Club Member
July 10, 2003
Offline
My JKU front D30 is high pinion
I used to wheel a lot. . .
4:40 pm
Club President
April 2, 2003
Offline
Yeah! I'm almost half way to John's post count!
Kathleen and Brad
4:50 pm
January 27, 2011
Offline
"BKGM Jeepers" wrote: Yeah! I'm almost half way to John's post count!
I'll run out of things to say LONG before I get that post count. 
=====
If you do not change direction, you may end up where you are heading -- Lao Tzu
6:40 pm
Club Member
July 10, 2003
Offline
"TomD" wrote: [quote="BKGM Jeepers"]Yeah! I'm almost half way to John's post count!
I'll run out of things to say LONG before I get that post count.
=====
Nonsense, I never say anything of importance and I have a huge post count.
I used to wheel a lot. . .
12:27 am
Club President
April 2, 2003
Offline
"JohnDF" wrote: [quote="TomD"][quote="BKGM Jeepers"]Yeah! I'm almost half way to John's post count!
I'll run out of things to say LONG before I get that post count.
=====
Nonsense, I never say anything of importance and I have a huge post count.
Me too. I'm just twice as efficient at saying nothing important as John is! 
Kathleen and Brad
3:59 am
Club Member
July 10, 2003
Offline
"BKGM Jeepers" wrote: [quote="JohnDF"]Nonsense, I never say anything of importance and I have a huge post count.
Me too. I'm just twice as efficient at saying nothing important as John is!
No, I'm just twice as good at saying nothing. Look, I did it again 🙂
I used to wheel a lot. . .
4:36 am
Club President
April 2, 2003
Offline
Oh grasshopper. Wise grasshopper.
Kathleen and Brad
4:56 am
Club Member
September 3, 2008
Offline
Quit post padding you two! I'm trying to catch up.
Um...what?
6:03 pm
Club President
April 2, 2003
Offline
More good news! - NOT!
http://content.usatoday.com/communities ... e-stolen/1
So I own Toyota's that get their cats stolen and now this? Wow!
Kathleen and Brad
6:12 pm
Seems odd that there advice to those in high crime areas is to take their doors off.
1 Guest(s)
