4:29 am
As of now our Trailmaster is a "maybe" for this weekend so I will take over her duties.
Josh you are "on" for lunch.
Need a head count for this run as a split-run may be in order if we have enough people. Most "pruning" will need to be done on the upper or southern side. Most " grunt work " to be on the lower side. Meet at Fresh Pond @ 8:00. For those of you who have not been to the upper side it is a very scenic drive. Please respond so we can finalize our plans.
Thanks, Joe M.
4:39 am
Club President
April 2, 2003
Offline "jsmorrow" wrote: As of now our Trailmaster is a "maybe" for this weekend so I will take over her duties.
Josh you are "on" for lunch.
Need a head count for this run as a split-run may be in order if we have enough people. Most "pruning" will need to be done on the upper or southern side. Most " grunt work " to be on the lower side. Meet at Fresh Pond @ 8:00. For those of you who have not been to the upper side it is a very scenic drive. Please respond so we can finalize our plans.
Thanks, Joe M.
I asked to change this earlier and was rebuffed. I can post on my other forum and hope people see the change but I already received confirmation on meeting at Freshpond from bay area people. I'd hate to miss people who've driven 2 and half hours because of a late change. Everybody meet at Fresh Pond at 8:00, along with whomever else shows up?
4:46 am
As of now I count
Whit3nuke
Jeff
Brad
Tom D + 2
Joe
Keane
Josh
John----- Maybe
George
Ken
Anoop
Rayzor
Mark
Richard
Don
Any corrections or suggestions gladly accepted.
4:52 am
"BKGM Jeepers" wrote: [quote="jsmorrow"]As of now our Trailmaster is a "maybe" for this weekend so I will take over her duties.
Josh you are "on" for lunch.
Need a head count for this run as a split-run may be in order if we have enough people. Most "pruning" will need to be done on the upper or southern side. Most " grunt work " to be on the lower side. I would change the meeting place to Subway / Shell at Sly Park unless those doing the the upper side don't mind the x-tra few miles. For those of you who have not been to the upper side it is a very scenic drive. Please respond so we can finalize our plans.
Thanks, Joe M.
I asked to change this earlier and was rebuffed. I can post on my other forum and hope people see the change but I already received confirmation on meeting at Freshpond from bay area people. I'd hate to miss people who've driven 2 and half hours because of a late change. Maybe I'll hang at Freshpond and the "50" group can pick me up there, along with whomever else shows up?
I did not know about the rebuff.
Will keep what we got.
5:12 am
January 27, 2011
Offline "jsmorrow" wrote: As of now I count
Whit3nuke
Jeff
Brad
Tom D +2
Joe
Keane
Josh
John
George
Fred
RayzorAny corrections or suggestions gladly accepted.
Ronie and our son, Willie, will be coming along with me.
=====
If you do not change direction, you may end up where you are heading -- Lao Tzu
5:44 am
Club Member
September 3, 2008
Offline There's a good chance I will be there. I will confirm later this week.
Um...what?
12:17 pm
Club Member
July 10, 2003
Offline So there is no confusuion, I changed all the posts to read "Meet at Fresh Pond @ 8:00" 
I used to wheel a lot. . .
1:05 pm
Club Member
July 10, 2003
Offline "jsmorrow" wrote: As of now I count
Whit3nuke, Jeff, Brad, Tom D, Joe, Keane, Josh, John, George, Fred, Rayzor.
Bummer, I don't see Justin. I don't get to hang out with my buddy Justin much any more. I wish he lived closer.
I used to wheel a lot. . .
1:29 pm
May 4, 2004
Offline I've invited a friend to ride along with me. I won't know if he'll make it until the last minute.
4:22 pm
Club President
April 2, 2003
Offline I expect that Ken and Anoop will also be added to the list. These are Stockton and SF people.
10:41 pm
"BKGM Jeepers" wrote: I expect that Ken and Anoop will also be added to the list. These are Stockton and SF people.
One rig or two?
10:54 pm
Club President
April 2, 2003
Offline They would constitute two vehicles.
1:30 pm
May 4, 2004
Offline I won't be able to make it after all. I was reminded about a conflicting family event.
4:14 am
Club Member
September 3, 2008
Offline "FAM" wrote: a conflicting family event.
Woah, sounds exciting!! 
Um...what?
5:21 am
Was looking forward to meeting you FAM!!
Question on things to bring. I was planning on chainsaw, loppers, rake, and hand saw. Appears we have a good attendance in the numbers. Anything we might be typically too heavy or even light on? I'm probably missing the system, but let me know if those tools are needed.
grazie
2:05 pm
Club Member
July 10, 2003
Offline I hate to do this, but I may have to back out of this run. I know that may jeaperdize my membership standings, but sometimes things just come up at inappropriate times. I will know more later.
I used to wheel a lot. . .
2:30 pm
"JohnDF" wrote: I hate to do this, but I may have to back out of this run. I know that may jeaperdize my membership standings, but sometimes things just come up at inappropriate times. I will know more later.
John, you have been a long time, loyal, and upstanding member of this club from almost day one. You have been on countless maintenance runs. If you miss this one, it will in no way jeopardize your member ship status. 🙂
2:32 pm
"GonZo" wrote: [quote="JohnDF"]I hate to do this, but I may have to back out of this run. I know that may jeaperdize my membership standings, but sometimes things just come up at inappropriate times. I will know more later.
John, you have been a long time, loyal, and upstanding member of this club from almost day one. You have been on countless maintenance runs. If you miss this one, it will in no way jeopardize your member ship status. 🙂
Now Bender on the other hand is just a slacker... so he better be there this time..... or he will get the boot.... :nutkick: 
2:37 pm
"Wh1t3Nukle" wrote: Was looking forward to meeting you FAM!!
Question on things to bring. I was planning on chainsaw, loppers, rake, and hand saw. Appears we have a good attendance in the numbers. Anything we might be typically too heavy or even light on? I'm probably missing the system, but let me know if those tools are needed.
grazie
You plan good. I don't think the rake will be needed but you never know.
2:46 pm
"GonZo" wrote: [quote="GonZo"][quote="JohnDF"]I hate to do this, but I may have to back out of this run. I know that may jeaperdize my membership standings, but sometimes things just come up at inappropriate times. I will know more later.
John, you have been a long time, loyal, and upstanding member of this club from almost day one. You have been on countless maintenance runs. If you miss this one, it will in no way jeopardize your member ship status. 🙂
Now Bender on the other hand is just a slacker... so he better be there this time..... or he will get the boot.... :nutkick:
This from the guy that missed both last year?
3:00 pm
"Bender" wrote:
This from the guy that missed both last year?
4:40 pm
Club President
April 2, 2003
Offline "Bender" wrote: [quote="GonZo"][quote="GonZo"]
John, you have been a long time, loyal, and upstanding member of this club from almost day one. You have been on countless maintenance runs. If you miss this one, it will in no way jeopardize your member ship status. 🙂
Now Bender on the other hand is just a slacker... so he better be there this time..... or he will get the boot.... :nutkick:
This from the guy that missed both last year?
Uh oh! Failed a bi-law requirement and then on to President? Where is this club going!
I always try to do the bare minimum...
Oh, Keane, if you're riding with me be sure to bring some warm clothes. I think you're used to it from your landcruiser days, but you may have softened up with the Manrano driving...
1 Guest(s)
